Pathé, Rotterdam | Insulated, low-maintenance rendered façades finished to a high standard

“A landmark building in a prominent location and a great calling card for our company in Rotterdam.” That is how Jacco Oostenbrug, Commercial Director at IJsselmonde, describes the renovated Pathé Schouwburgplein building in the centre of Rotterdam. IJsselmonde carried out the rendered part of the façade renovation, which covers just under two thousand square metres in total.
IJsselmonde had been involved in the cinema’s façade renovation since early 2017. “During the preparation phase, we held a number of intensive meetings about the construction work and how it would be carried out,” says Oostenbrug. “We also discussed the design, which initially featured many unusual profiles and frames. This created a very attractive appearance, but also posed risks in terms of water ingress. Ultimately, we decided to make some adjustments to the design together with the other parties involved.”
Junction details
“The initial requirement for the rendered section was a ventilated render system,” Oostenbrug continues. “The drawback of this system is that it requires movement joints, which often do not look very attractive. It is also maintenance-intensive, which is equally undesirable.” IJsselmonde recommended a different façade system from the one originally specified, using a different manufacturer and a different façade and system build-up. Oostenbrug explains: “We chose StoTherm Classic, an external wall insulation system that has been used worldwide for more than forty years. This system provided a better thermal solution, without unsightly movement joints and with better junction details.”

Front façade.
Seven applications
Installing the StoTherm façade system was quite labour-intensive. “First, we fixed EPS insulation boards to the old façade, followed by the reinforcement layer and a base coat of decorative render,” says Oostenbrug. “We then applied two coats of StoMilano over this base coat. This is an organic, very fine-grained modelling render that we used to give the walls a smooth, even finish. Finally, we applied a two-coat dirt-repellent finish, StoLotusan. So in total, that amounts to seven applications.”
Planning and logistics
IJsselmonde began installing the system at the end of May. The intensive preparation phase meant work started a little later than planned. The completion date was fixed, however, leaving less time for construction. Careful planning and putting enough people on site enabled IJsselmonde to keep the challenging schedule under control. “Logistics presented another challenge,” says Tymen van der Werf, IJsselmonde’s site manager, who was responsible for delivering the project. “The city-centre location, surrounded by two busy roads, and the limited space on site meant we had to plan deliveries of raw materials and other materials carefully. Most deliveries were made just in time.”

The smooth render accentuates the building’s distinctive lines.
Proud
Now that the work is complete, Oostenbrug looks back with satisfaction. “There were some fairly heated discussions at the outset, but you wouldn’t have known it during the construction work. Working well together and keeping the shared end result in mind, we created a beautiful building with distinctive finishes and a high standard of workmanship. We are proud that, as a true Rotterdam company, we were able to deliver this project for a true Rotterdam main contractor.
A business enquiry for IJsselmonde? Get in touch
Who worked on Pathé Schouwburgplein
- external wall insulation systemStoTherm ClassicIn this story
Keep following this
Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.
- ProjectPathé Schouwburgplein
- SubjectRenovation & conversion
- CompanyStoTherm Classic
- CompanyIJsselmonde


















