Better floor acoustics, without the hassle
Text Roel van GilsImage Unifloor

A school full of pupils is never quiet. At the Berlage Lyceum in Amsterdam, the noise was amplified by the timber structural floors, allowing impact sound from moving chairs and footsteps to travel easily to the rooms below. The challenge was to improve the acoustics without adding significant weight or unnecessary height to the heritage floors. TwinPanel Acoustic from Unifloor addresses both problems at once, with minimal effort.
Unifloor has its roots firmly in the flooring sector. Drawing on this expertise, the company has spent years developing underlays that not only reduce sound, but also allow the final floor covering to be laid directly on top. “That is an important distinction between our products and many existing solutions,” says Robert van Leeuwen of Unifloor. “We focus on achieving the greatest possible sound reduction with the least possible weight and build-up height. Alternatives often require levelling first and several separate operations.”
Lightweight and clean
TwinPanel Acoustic consists of a 10 millimetre gypsum board combined with a 4 millimetre coconut fibre layer and a calibrated 4 millimetre MDF board. “The integrated adhesive layers make it easy to bond the boards together without additional adhesive. They are lightweight, clean and easy to cut to size,” says Van Leeuwen. “Laid in a staggered bond, they create a level substrate just 18 millimetres thick, ready for the final floor covering to be installed directly on top. This not only saves weight, but also eliminates an entire operation.” A traditional gypsum board can easily weigh 26 kilograms per square metre, whereas TwinPanel Acoustic weighs only around 15 kilograms.

14 dB sound reduction
On the timber structural floors of the Berlage Lyceum, TwinPanel Acoustic reduces impact sound by around 14 dB. “In practice, that is a huge improvement when you consider that a 3 dB reduction in sound level means a halving of the sound,” Van Leeuwen emphasises. He also sees opportunities for TwinPanel Acoustic in renovations of hospitals, care facilities, physiotherapy practices and older walk-up blocks of flats, as it can substantially improve the acoustic performance of an existing floor without placing unnecessary loads on the structure. “It also creates a new subfloor on which the resident or user can then lay virtually any floor covering they want.”
Salverda, the contractor at the Berlage Lyceum, was quick to adopt Unifloor’s solution. “We supervised the installation, trained the workers and visited the site several times during the work. In total, around 2,400 square metres of TwinPanel Acoustic were successfully installed in two phases,” Van Leeuwen concludes.
Question about this story? Ask your question
Keep following this
Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.
- SubjectProduct information


















