Yearbook

The assurance of acoustic performance, in new build and renovation

Text Lieke van ZuilekomImage Fonofloor B.V.

Voor renovatieprojecten, waar vaak beperkingen in opbouwhoogtes gelden, adviseert Van den Bersselaar het dunnere fonofive® (6 mm).
Voor renovatieprojecten, waar vaak beperkingen in opbouwhoogtes gelden, adviseert Van den Bersselaar het dunnere fonofive® (6 mm).

Urbanisation, a growing number of complex projects, flexible layouts and new forms of housing that must meet ever higher quality standards: these are just some of the current challenges in construction, calling for architects and designers to think creatively and adapt.

A key part of meeting these challenges is the acoustic performance of buildings. Housing associations, property developers, owners’ associations and municipalities are setting standards ever higher than those required by the Building Decree 2012, making greater levels of acoustic insulation necessary. There is also a demand for innovative, forward-looking applications of materials, which Fonofloor B.V. is keen to provide.

Fonofloor® (8 mm) is highly resistant to dynamic and static loads. You can walk on it without affecting its performance, and water is no problem either.

Since 2002, Fonofloor B.V. has supplied acoustic insulation membranes to reduce impact sound in floating screeds. “Acoustics and sound are challenging subjects,” says manager Martin van den Bersselaar. “Noise nuisance can arise in various ways. We believe residents and building users deserve optimum acoustic comfort. The ‘Fonofloor Formula’ is an ideal way to achieve this. With this formula, we guarantee the acoustic performance in advance. We also provide support at every stage of the project. We advise during the design process, inspect the structural floor for defects that could adversely affect the insulation value, and work exclusively with approved preferred installers, whose work comfortably exceeds the minimum requirements of the Building Decree 2012. The results are verified by an independent measurement after completion.”

Acoustic performance exceeds the Building Decree

People in the Netherlands still experience noise nuisance all too often. Research shows that, even with the acoustic requirements set out in the Building Decree, < 25% of people may still experience nuisance. “Noise from neighbours is the number one source of annoyance,” says Van den Bersselaar. “The number of reports in this area has even risen by 10% over the past three years. Housing associations and owners’ associations in particular are grappling with this problem and actively seeking robust, affordable and comfortable solutions. Fonofloor products are an excellent fit with this ambition and are based on the mass-spring-mass principle. A ‘springy’ insulation layer is installed between the structural floor and the sand-cement or anhydrite screed to absorb sound waves and vibrations. All Fonofloor products consist of a bituminous layer, largely made from recycled material, and a resilient polyester non-woven backing. The products are supplied in rolls and can easily be unrolled over the floor. The insulation membranes are vapour-tight. Underfloor heating can also be installed on top of the insulation layer if required. We recommend using the Fonofix clip rail, which can be bonded directly to the insulation layer. This prevents puncturing the layer and compromising its insulating properties.”

Developed specifically for timber floor structures, fonoblock+® is a 9 mm-thick membrane that combines the exceptionally high density and acoustic properties of lead foil with a resilient layer.

Robust: work can continue after installation

In 2020, mineral wool and EPS boards are still regularly used in floating screeds. Fonofloor B.V.’s floor insulation membranes, however, have a bituminous top layer that makes them less vulnerable than traditional products. “Fonofloor®, for example, is highly resistant to dynamic and static loads. You can walk on it without affecting its performance, and water is no problem either,” says Van den Bersselaar. “Fonofloor® is just 8 mm thick and has a dynamic stiffness of 18 MN/m³. The insulation membrane delivers very good acoustic results, from LnT,A ≤ 49 to well below 39.” For renovation projects, where build-up height is often restricted, he recommends the thinner fonofive® (6 mm). “We developed fonoblock+® specifically for timber floor structures. This 9 mm-thick membrane combines the exceptionally high density and acoustic properties of lead foil with a resilient layer, making it suitable for both impact sound and airborne sound insulation. That means we can offer a suitable solution for every project.”  

A business enquiry for Fonofloor BV? Get in touch

Companies in this story

Keep following this

Get an email when a new story is published. No account needed.

What you follow
  • SubjectYearbook
  • CompanyFonofloor BV
Share this article

Advertisement

Follow on Stedenbouw

Follow

Follow a project or company and you’ll receive an email whenever a new story appears. Follow a theme or topic and you’ll receive a weekly roundup. No account or password needed: every email includes a link to what you follow.