High-quality aluminium windows, doors and façades
Text Lieke BousemaImage Thermo Konstrukties BV

For more than 35 years, Thermo Konstrukties BV has been designing, manufacturing and installing high-quality aluminium windows, doors and curtain walls. For both residential and non-residential projects. “Aluminium is durable, low-maintenance and of very high quality,” says director Albert Derks. “The material is highly resistant to the effects of weather and retains its aesthetic value even after a long time. The many projects we have been able to carry out in collaboration with architects, contractors and other clients are proof of this.”
Villa Hugo in Cuijk
Villa Hugo is a fine example. In Cuijk, sixteen luxury apartments have been created behind the historic front façade of the former Victor Hugo cigar factory. It is not a listed building, but is nonetheless a striking landmark full of character, says project engineer Tom Verbruggen. “On behalf of Bouwbedrijf Peter Peters, we installed aluminium SlimLine (SL) 38 frames in the historic façade. Plastic strips have been incorporated into the glass, while an aluminium profile has been added to the exterior. This gives the frames the appearance of steel and preserves the original character of the front façade, while residents also benefit from today’s energy efficiency and comfort.” One unusual feature is that the old frames were retained during replacement and used as subframes, he says. “The subframes were clad in aluminium, and the new frame was then fitted into them. This enabled considerable savings on materials. It also preserved the stability of the front façade.”

Nieuw Bergen in Eindhoven
Currently under construction is Nieuw Bergen in the heart of Eindhoven, comprising five new buildings and two renovated buildings. On behalf of contractor Stam + De Koning, Thermo Konstrukties BV is manufacturing and installing no less than 7,600 m2 of aluminium frames and 300 m2 of curtain walling for the project, says Verbruggen. “For buildings 1 and 2, we are also supplying the aluminium flashings around the frames.” Nieuw Bergen is characterised by its pitched roofs and large glazed areas, which create an open feel and maximise daylight. “Our frames follow the pitch of these roofs,” says project engineer Edwin Hendriks. “This is where our expertise really comes into its own.”
The frames and glass are installed in the façade elements at Thermo Konstrukties BV’s production hall in Cuijk. The completed elements are then transported by lorry to the construction site in Eindhoven, ready for installation. This means an entire residential floor can be enclosed within two working days, says Hendriks. “Only the flashings are installed on site. Once a floor is complete, the interior portals are finished there.”
NutriControl in Veghel
Thermo Konstrukties BV is also contributing to the construction of the new office and laboratory for NutriControl in Veghel, on behalf of Bouwbedrijf van de Ven. “For this project, we are supplying and installing 420 m2 of ConceptWall (CW) 50 curtain walling and 690 m2 of MasterLine 8 insert frames,” says project engineer Stan Giepmans. “What makes these frames innovative is that they can be installed directly into the sandwich panels, without subframes. This results in substantial savings on building materials. It also removes an entire stage of work from the construction process, allowing the project to be completed considerably faster.”

Matchbox in Eindhoven
Thermo Konstrukties BV will also soon begin work on Matchbox (Veld K) in Eindhoven, again on behalf of Stam + De Koning. “Matchbox will be built largely from timber,” say work planner Dennis Boots and technical director Ramon Koenen. “The façades will be as transparent as possible, with our frames playing an important role. The frames are 200 mm wide when viewed from the front and are joined in groups of three. This creates a total visible width of no less than 600 mm, giving the building even more presence. In total, we are manufacturing and installing 1,500 m2 of frames based on the MasterLine 8 system. One interesting detail is that the frames feature a green logo and are partly made using recycled content. At the end of their service life, they can also be 100% recycled, helping us to close the materials loop as far as possible.”
Question about this story? Ask your question
Keep following this
Get an email when a new story is published. No account needed.
- SubjectYearbook


















