16/20 kW propane heat pump is ideal for small commercial projects such as shops

HEAT PUMPS FOR SHOPS
The new contemporary home furnishings store of Colors@Home Dijkstra is due to open next summer at a prominent location on the N384 ring road in Franeker. The store, which sells window coverings, curtains, flooring, outdoor blinds and beds, is moving into three units in a new multi-tenant commercial building. To ensure a comfortable indoor climate, Sangers Installatietechniek is equipping the units with all the necessary mechanical and electrical services. For heating the units, the installer from Kootstertille opted decisively for WOLF Energiesystemen’s new CHA monobloc 16/20 kW air-to-water heat pump.
Colors@Home Dijkstra purchased the retail units before construction of the multi-tenant commercial building began, allowing the building and building-services components to be perfectly coordinated, explains Bert Sangers, owner of Sangers Installatietechniek. “As the mechanical and electrical services contractor, we are installing all the systems for the new home furnishings store, from drainage and water pipes to lighting and power installations, fire alarm systems and intruder security. We are also responsible for heating and cooling the units. Underfloor heating pipes have been embedded in the ground-floor slab and connected to two large manifolds. The pipes leading to the heat pump have also been embedded in advance, neatly avoiding visible pipework. As the building has large areas of glazing, the ground floor will also be cooled.”

Outdoor unit in full view
The underfloor heating is supplied by WOLF Energiesystemen’s latest CHA monobloc 16/20 kW air-to-water heat pump, positioned in front of the external wall. “The paving contractors created a raised platform for it during construction, complete with an opening for condensate drainage,” says Sangers. “An electric water heater has been installed next to the indoor unit to provide hot water for the staff room.”
Environmentally friendly, energy-efficient and quiet
Sangers says the choice of the CHA monobloc heat pump for Colors@Home Dijkstra was an obvious one. “We have been working with the 7 and 10 kW CHA monobloc heat pumps for several years. In 2019, they were among the first heat pumps on the market to use R290 (propane) refrigerant, and they are also highly energy-efficient and quiet. The systems can also be monitored remotely with ease. We now have many CHA heat pumps installed in the field, all operating without problems. And if a fault does occur, we have direct access to WOLF Energiesystemen’s technical support team. We have a good relationship with them on service, maintenance and advice. That is why we are confident in offering a ten-year warranty on the heat pumps.”
Efficient, affordable and attractive
The initial plan was to install 7 and 10 kW heat pumps in cascade in Franeker. “However, that would mean having two outdoor units and two indoor units,” says Sangers. “When WOLF Energiesystemen told us about the launch of the 16/20 kW heat pump, we switched to it straight away. This solution is more efficient, more cost-effective and more attractive on the external wall. Thanks to this innovation, we can now deliver larger installations more easily too.”
Also for the small commercial market
The CHA monobloc air-to-water heat pump was specifically developed to achieve high efficiency (SCOP = 5.46) and make installation simple and safe, explains Wim Beltman, technical adviser for Sustainable Total Solutions at WOLF Energiesystemen. “A low-speed fan with an innovative blade design, carefully engineered pipework geometry and a sound-absorbing EPP core also ensure impressively low sound pressure levels.” Initially, the heat pump was available only in 7 and 10 kW outputs. “For several years, these outputs have allowed us to meet demand for heat pumps in new-build homes. The heat pumps can supply water at temperatures of up to 70°C when the outdoor temperature is -10°C, making them ideally suited to renovation projects where, for example, the building envelope has already been upgraded with additional insulation.” Since the beginning of this year, the CHA monobloc has also been available with an output of 16/20 kW. “This is useful not only in larger, older homes that cannot meet new-build insulation standards, but also in the small commercial market, for example in shops. The CHA monobloc series allows us to install up to five heat pumps in cascade, giving a total installed capacity of up to 100 kW.”
Propane as a refrigerant
The CHA monobloc uses the natural, environmentally friendly and future-proof refrigerant propane (R290, GWP = 3). “This helps us comply with the European F-gas Regulation, which aims to phase out the use of synthetic refrigerants. R290 will remain free of restrictions for years to come. And with the forthcoming CO2 tax, investing in propane is becoming increasingly attractive financially too. The CHA monobloc heat pump can optionally be combined with our CHC heat pump centre, in which a 300-litre hot water cylinder, expansion vessel, pump and all the control technology work together intelligently.” WOLF Energiesystemen also made attractive design choices when developing the heat pump. Its grey finish allows the outdoor unit to blend in neatly with the façade.
Selected performance data for WOLF’s CHA series.

A business enquiry for WOLF Energiesystemen? Get in touch
Companies in this story
Keep following this
Get an email when a new story is published. No account needed.
- SubjectHVAC
- CompanyWOLF Energiesystemen



















