Distribution centres

DC Ingram Micro | Jointless hybrid floor as a functional and sustainable solution

DC Ingram Micro | Jointless hybrid floor as a functional and sustainable solution

To deliver the floor structure for the new DC for Ingram Micro, main contractor Heerkens van Bavel Bouw enlisted the expertise of Van Berlo. Based on the functional requirements and the target BREEAM ‘Outstanding’ sustainability rating, the team chose a jointless hybrid floor, the VB Zetta®. Michiel van Zon, commercial and technical adviser at Van Berlo, explains why.

From its modern distribution centre at the Vossenberg business park in north-west Tilburg, Ingram Micro, a logistics specialist serving the largest webshops in the Netherlands, will handle logistics operations for de Bijenkorf. “Together with the contractor, we selected the floor type best suited to the activities planned for the warehouse, based on the intended floor loading requirements,” says Van Zon. “We took into account both sustainability and, of course, cost. The VB Zetta® jointless hybrid floor came out on top.”

Voegloze hybride vloer

Wide range of applications
Combining conventional top reinforcement with steel fibres, the VB Zetta® jointless hybrid floor is suitable for a wide range of applications in all kinds of warehouses. In addition to the warehouse, with a floor area of just under 24,000 m², Van Berlo also poured the dispatch floors (7,250 m²), office floors (3,400 m²), mezzanine (6,350 m²) and external loading bays, covering a total of 5,340 m². Van Zon says: “The warehouse floors were built to NEN 2747 flatness class 4 and handed over with an independent flatness report. We started work in September 2018, on both the warehouse floor and the dispatch floor, which was built to the DIN 18202 flatness requirement. Both floor structures were designed by the main contractor, are ground-bearing and were completed in thirteen pours. Around 2,400 m² was poured each day, amounting to 415 m³ of concrete.” 

Unlike the floors inside the new distribution centre, Van Berlo designed and constructed the external loading bay floors entirely in-house, including the conventional reinforcement and concrete mix. “We also installed a reinforced vehicle-impact section on the outside of the loading bay in the form of an AV beam,” says Van Zon. “The floors, both inside and out, were completed in close consultation and good collaboration with contractor Heerkens van Bavel Bouw. The pace was fairly demanding, but we never lost sight of the schedule or the quality. Ingram Micro now has a functional, sustainable floor that requires little maintenance.”

Een zakelijke vraag aan Van Berlo | Experts in funderingen en bedrijfsvloeren? Neem contact op

Wie eraan werkte

DC Ingram Micro in Tilburg

  1. vloerconstructieVan Berlo
  2. hoofdaannemerHeerkens van Bavel Bouw

Blijf dit volgen

Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.

What you follow
  • ProjectDC Ingram Micro
  • SubjectDistribution centres
  • CompanyVan Berlo | Experts in funderingen en bedrijfsvloeren
  • CompanyHeerkens van Bavel Bouw
Deel dit artikel

Advertisement

Follow on Stedenbouw

Follow

Follow a project or company and you’ll receive an email whenever a new story appears. Follow a theme or topic and you’ll receive a weekly roundup. No account or password needed: every email includes a link to what you follow.