Kloosterboer Delta Terminal 3 | Rotterdam

Cold store: exceptional airtightness is a must!
Optimal airtightness is vital for a cold store. That is why B-Built called on Isocab Construct’s expertise to install the insulated wall and roof panels for the Kloosterboer Delta Terminal 3 on the Maasvlakte in Rotterdam. These experts in airtight construction are undaunted by the cold store’s considerable scale or the tight schedule. In fact, it motivates them. The result is an exceptionally airtight building, even 50% better than the BREEAM requirement originally set.
Isocab Construct is an independent installation company that grew out of panel manufacturer Isocab after it became part of the Kingspan group. “For forty years, we have been a benchmark in airtight construction,” says Wouter Doclo of Isocab Construct. “Optimal airtightness is particularly important for a chilled and frozen storage facility. Poor installation can lead to serious problems during operation. We have already completed several projects with B-Built, mainly in France and Belgium, our key markets. There are only a few companies in the Benelux that can meet these high requirements and handle such large volumes.”

A sum of details
The cold store on the Maasvlakte comprises a total of 13,750 m² of wall panels and 11,150 m² of roof panels. “We used 200 mm-thick Quadcore panels from Isocab by Kingspan for the walls and 220 mm-thick panels for the roof,” explains Edward Compernolle, project manager at Isocab Construct. “These panels not only offer better insulation than standard PIR panels, but also perform better in fire tests. Together with B-Built, we developed the design in 3D and calculated the specific anchoring points in-house. Installing the panels and ensuring airtight connections requires expertise. Ultimately, whether you meet the requirements comes down to the sum of the details: good design, preparation, execution and follow-up.” Isocab Construct clearly excels in this area.
Isocab Construct began installing the panels in mid-September 2018. By early February 2019, the cold store was wind- and watertight. “The main challenge was the speed of installation and the difficult, often windy, weather conditions typical of the Maasvlakte,” says Wouter Doclo. “Our strength lay in working flexibly and coordinating effectively with the other partners on site, so we could keep working without delays. We are proud of the end result: a building to be proud of.”


A business enquiry for Isocab by Kingspan? Get in touch
Wie aan Kloosterboer Delta Terminal 3 werkte
Keep following this
Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.
- ProjectKloosterboer Delta Terminal 3
- SubjectGeneral
- CompanyB-Built BV
- CompanyIsocab by Kingspan




















