Residential and non-residential construction

ACA flats | ‘Façade renovation is about more than just technology’

ACA flats | ‘Façade renovation is about more than just technology’

As part of the sustainability upgrades to the 362 homes in the ACA flats in Utrecht, Schipper Kozijnen is producing and installing around 1,300 sustainable façade elements. For the window-frame manufacturer, which is celebrating its golden anniversary this year, this is one of the largest projects in its history.

Schipper Kozijnen is carrying out the work on behalf of Hemubo. In early 2018, Schipper Kozijnen joined the project team to help develop a sustainable and efficient façade solution. “We work with Hemubo regularly,” says Schipper Kozijnen director Jurian Tabbers. “Particularly on complex housing projects where the impact on residents is significant. As one of the largest window-frame manufacturers in the Netherlands, we do a lot of work for the private market. The knowledge and experience we have gained there over the past decades are increasingly being called upon for projects too.”

Turning requirements into a design
Based on the requirements set by client Mitros, the project team developed a façade design. The speed of work on the homes and minimising disruption for residents were key considerations in the façade’s design. The block also had to meet the requirements for NOM-ready status. The target for airtightness, and the associated qv;10 value, was ambitious. Tabbers: “Taking these requirements into account, we developed a sustainable, full-height façade element combining uPVC window frames, timber-frame elements and Eternit cladding.”

Sleek window frames in natural grey
“We worked with Gevelconcept to produce the façade elements,” Tabbers continues. “From an architectural perspective, Door Architecten opted for textured Eternit panels. The frames were finished with proCoverTec, a matt satin finish with a durable colour layer. This gives the frames a sleek, matt appearance in a unique natural grey shade. The proCoverTec topcoat makes the frames highly UV-resistant, less prone to dirt and easier to clean.” 

Speciaal voor houten vloerconstructies werd fonoblock+® ontwikkeld, een 9 mm dik membraan dat de extreem hoge dichtheid en akoestische eigenschappen van loodfolie combineert met een verende laag.

Before and after.

Fast removal and installation
In October 2018, Schipper Kozijnen produced the first façade element for the ACA flats. This mock-up served as the model for the rest of the project. Installation is now in full swing. Tabbers: “To minimise disruption to residents, the elements were made ready for installation. As soon as the existing uPVC frames are removed, we hoist the prefabricated elements into place in the façade. The existing uPVC frames we remove are 100% recycled and used as raw material for new uPVC profiles. The new elements are fitted with special lifting eyes, allowing them to be installed easily without damage. Once an element is installed, the façade is immediately wind- and watertight.” 

A logistical operation
Hoisting and installing the façade elements is primarily a logistical operation. Schipper Kozijnen is working with large elements and limited space on site, so the elements have to be delivered just in time. Tabbers: “During installation, it is also important to align the elements despite the dimensional tolerances. The challenge is to allow enough movement in the elements without compromising airtightness.”

Fonofloor® (8mm) heeft een zeer hoge resistentie tegen dynamische en statische belasting. Je kunt er gewoon overheen lopen, zonder de werking aan te tasten en ook water is geen probleem.

The façades have been renewed with sustainable, full-height elements incorporating
uPVC window frames, timber-frame elements and Eternit cladding.

Residents’ needs
Renovation and/or major maintenance is about more than just technology. “Residents are just as important,” Tabbers stresses. “We are aware that we are working in their homes. We work tidily and take account of things that may seem small but matter to residents. For the ACA flats, for example, we make the façade elements as ready for occupancy as possible. We fully finish them on the inside. If requested, we also fit insect screens and/or roller blinds in a range of colours.”

A shared challenge
Schipper Kozijnen has completed around 25% of its work. Progress is good, but Tabbers says there is room for improvement: “We have taken on a major challenge together. We have to work hard to keep the schedule and logistics under control. With good cooperation between all the parties, we can certainly do that.”

Question about this story? Ask your question

Wie aan ACA-flats werkte

  1. carrying out major maintenanceHemuboMentioned in ACA flats | Utrecht
  2. housing associationMitrosMentioned in ACA flats | Utrecht
  3. window frame manufacturerSchipper KozijnenIn this story
  4. architectDoor ArchitectenIn this story
  5. Project colourproCoverTecMentioned in High-quality prefabricated façade elements for CJ-dreven

Keep following this

Get an email when a new story is published. No account needed.

What you follow
  • ProjectACA flats
  • SubjectResidential and non-residential construction
  • CompanySchipper Kozijnen
  • CompanyDoor Architecten
Share this article

Advertisement

Follow on Stedenbouw

Follow

Follow a project or company and you’ll receive an email whenever a new story appears. Follow a theme or topic and you’ll receive a weekly roundup. No account or password needed: every email includes a link to what you follow.