Residential and non-residential construction
Sluishuis: working with 5,000 tonnes of reinforcement steel
Text Lieke van ZuilekomImage Balvert Betonstaal

As concrete can withstand compressive forces but only limited tensile forces, a substantial quantity of reinforcement steel is being installed in the concrete floors, concrete walls and compression and tension pile caps on the Sluishuis project.
A total of around 5,000 tonnes of reinforcement steel is being produced, supplied and installed by Balvert Betonstaal on behalf of the VORM and BESIX joint venture.
“The building’s unusual form, with its sloping sides and cantilever, calls for close collaboration and good coordination,” says Barry van Loevesijn, work planner at Balvert Betonstaal. “This means intensive weekly contact on site with the construction team and work planners from VORM Bouw/BESIX, as well as Balvert’s foremen. The main challenge lies in the extensive tensile reinforcement in the main corridor walls, which prevents the sloping cantilever walls from deflecting. In addition, various services run through heavily reinforced areas, creating numerous clashes. Before work starts on each new floor, we carefully review the reinforcement drawings by structural engineer Van Rossum and provide advice on them, for example on how to optimise production and installation. The reinforcement steel content is around 300 kg per m³. All concrete reinforcement is delivered to site just in time and installed immediately.”

Set sequence of work
“The in-situ concrete floors are supported and shuttered on site,” says John van der Veen, foreman at Balvert Betonstaal. “For this particular project, table formwork is used. We install the reinforcement steel in accordance with our construction drawings, after which the edge formwork is put in place and we start installing the reinforcement. All work is inspected by us and by the site supervisor, after which the concrete is poured. The walls follow a day later: the reinforcement steel is installed, the formwork erected and the concrete poured, in that order. Every day, 20 reinforcement steel fixers from Balvert Betonstaal are on site to keep this process on track. It is a considerable challenge, not least because of the building’s sloping form.”
About Balvert Betonstaal
Balvert Betonstaal specialises in reinforcement steel structures for housing and commercial construction, infrastructure and industrial projects, and civil engineering works. The third generation of the Balvert family now works in the family business. “We have a committed, close-knit team of around 85 employees, as well as a flexible workforce, enabling us to deliver the most challenging projects,” says Dave Balvert, Head of Work Preparation and Purchasing. “Sluishuis is a prime example. From our modern reinforcement centre in Nieuwkoop (South Holland), we produce cut and bent reinforcement steel, precast elements and reinforcement steel in stock lengths. We also supply and install various types of welded wire mesh and supplementary reinforcement.”
Question about this story? Ask your question
Keep following this
Get an email when a new story is published. No account needed.
- SubjectResidential and non-residential construction


















