Why fall protection matters

Every year, many accidents happen while working at height. But did you know that these could have been prevented with proper roof or fall protection?
That is why it is so important to ensure that proper protection is in place so people can work safely. How? Find out here.
Causes of accidents
Every year, around 550 serious accidents occur while working at height, 23 of them fatal. According to the RIVM, the main causes are incorrectly positioned ladders, losing one’s balance and inadequate fall protection.
How to prevent accidents
Many of these accidents could have been prevented with proper fall protection, such as roof edge protection or a safety harness. It is important that workers know how to use the fall protection equipment. This can be achieved, for example, through training. For safety, fall protection equipment must also be inspected annually, and its correct use must be supervised.
Different types of fall protection
To prevent accidents, it is therefore important to have proper fall protection. But what types are there? The best-known type is roof edge protection. This involves installing guardrails along the edge of the roof to reduce the risk of someone falling. Does the roof have rooflights? Make sure they are properly protected, as a rooflight is not strong enough to stop a fall. When someone is working alone on a roof, fall arrest belts or safety harnesses can prevent them from falling. Another option is to use a cage ladder. A cage ladder starts at a height of 2.5 metres and provides a safe escape route in the event of a fire, for example. A cage ladder is also ideal when someone needs to access the roof from outside the building. Bear in mind that if the vertical distance covered by the cage ladder is more than 10 metres, intermediate rest platforms must also be installed.
Question about this story? Ask your question
Keep following this
Get an email when a new story is published. No account needed.
- SubjectGeneral


















