Innovative roof hatch scores top marks for sustainability, environmental performance and quality

Since the government tightened the energy performance coefficient (EPC) requirements for new-build projects in 2015, the requirement for the Rc value of roofs rose from 4.5 to 6.0. This change led to major changes in detailing. “Demand for sustainable products is also growing,” says Kees Korsten, director of Storax. “The number of BREEAM projects rose by 74 per cent last year, and the Energy Agreement also encourages sustainable measures. Storax is responding with DEMAXX, a roof hatch with an Rc value of 6.3.”
The Dutch government aims for all planning applications for new-build projects, in both the housing and non-residential sectors, to meet the requirements for nearly zero-energy buildings (BENG) from 1 January 2020. On 1 January 2015, an important step was taken towards achieving this goal: the EPC requirement for homes and non-residential buildings was tightened from 0.6 to 0.4. The minimum requirements for thermal resistance (Rc value) were also raised. Since 1 January 2015, new-build roofs have been required to have an Rc value of ≥ 6.0 m²K/W. Storax was the first supplier of roof hatches and other products in the market to respond to this change.

The top of the hatch upstand is fitted with anti-slip material all the way around, helping to prevent unpleasant slips.
Performance to the max
“DEMAXX offers the max in sustainability, environmental performance and quality. In developing the roof hatch, we focused not only on high-quality, durable materials, but also on effective sealing and an excellent thermally broken construction,” says Korsten. “Our aim was to achieve the highest possible insulation values on the market. The results of various tests by SKG, covering air and water tightness and resistance to wind load, together with calculations by Peutz, show that we have succeeded exceptionally well.
The DEMAXX roof hatch has an Rc value of no less than 6.3 for both the lid and the upstand. It makes a significant contribution to reducing a building’s CO2 emissions. DEMAXX is also made in the Netherlands, which keeps CO2 emissions from transport to the site to a minimum.”

A SKG** lock and cylinder, operable from both inside and outside, ensure optimum protection against break-ins.
100% thermally broken construction
“To prevent cold bridging and the resulting heat loss, condensation and mould growth, DEMAXX has a 100% thermally broken construction,” says Korsten. “A combination of aluminium cladding for the external structure and glass-fibre-reinforced pultruded profiles for the internal structure makes the roof hatch not only highly insulating but also exceptionally robust.”
Alongside sustainability and quality, considerable attention has been paid to ease of operation and safety, says co-owner Mike Straks. “On the inside, DEMAXX is fitted with two gas struts, which mean that once the cylinder lock has been unlocked, the roof hatch can be opened and closed with minimal force. When open, DEMAXX locks automatically, so the hatch can never close unexpectedly, even in strong winds. The top of the hatch upstand is fitted with anti-slip material all the way around, helping to prevent unpleasant slips. A SKG** lock and cylinder, operable from both inside and outside, ensure optimum protection against break-ins.”

As well as the DEMAXX roof hatch, Storax supplies ladders, including caged ladders, folding stairs and safety railings, giving clients a complete, tailored solution for roof access.
Easy installation
DEMAXX is easy to install thanks to its lightweight construction. “The roof hatch has a flange all the way around, with all the fixing holes pre-drilled. After it has been installed on the supporting structure, the roofer seals or bonds the roof covering into place,” says Korsten. “The DEMAXX roof hatch has a water bar, which makes it easy to fit the roof covering underneath.” Straks adds: “The installation instructions supplied with the hatch set out the work sequence step by step, helping to ensure an excellent finished result.”

On the inside, DEMAXX is fitted with two gas struts, which mean that once the cylinder lock has been unlocked, the roof hatch can be opened and closed with minimal force.
Complete range of hatches and accessories
DEMAXX was launched in 2017 and has attracted considerable interest from architects, contractors, installation companies and end users. “The roof hatch is available as standard in three clear opening sizes, 70×90, 90×90 and 70×140 cm, and is coated in RAL 7047,” says Straks. “Other colours are available on request.” Korsten adds: “As well as the DEMAXX roof hatch, we supply ladders, including caged ladders, folding stairs and safety railings, giving clients a complete, tailored solution for roof access.”
Storax specialises in hatches and, in addition to roof hatches, offers wall and floor hatches. The company, based in Zwijndrecht, also supplies N.E.S. escape hatches for underground spaces such as car parks and train and metro stations.
Question about this story? Ask your question
Keep following this
Get an email when a new story is published. No account needed.
- SubjectInnovation & technology


















