Innovation & technology

The quietest silencers in the Netherlands

Text Lieke van ZuilekomPhotography Panflex

Wie grondig isoleert, moet ook voldoende ventileren.
Wie grondig isoleert, moet ook voldoende ventileren.

Driven by high energy prices and climate targets, more and more homeowners are choosing to make their homes more sustainable. Cavity wall insulation, roof insulation and triple glazing prevent energy (heat) from escaping and create the perfect conditions for a heat pump. “Anyone who insulates thoroughly also needs to ensure adequate ventilation,” stresses Henry Kale, Account Manager at Panflex. “Fortunately, more and more residents are aware of this. Heat recovery ventilation systems are selling like hot cakes. This is a positive development, but unfortunately it brings a new problem: noise nuisance.”

“Our Building Decree stipulates a maximum installation noise level of 30 dB(A). Since a heat recovery ventilation system produces an average of between 55 and 60 dB(A), a considerable amount of noise has to be filtered out,” says Kale. “To prevent noise nuisance, it is important that the system is properly engineered and installed. Not only must duct diameters, air volumes and air speeds be correct, the system must also be free of obstructions. After all, resistance also creates noise. Silencers on the unit and valves can then provide additional attenuation.”

The acoustically insulated flexible ventilation ducts are part of Panflex’s heat recovery ventilation package.

Quick and effective

The motors in heat recovery ventilation systems produce low-frequency tones from 125 to 500 Hz, Kale explains. “These are ‘long waves’ that you want to remove from the airflow as quickly and effectively as possible. To achieve insertion loss, acoustic ventilation ducts or silencers of at least 1 metre are required. Our products meet this exact specification. In fact, we offer the best and quietest silencers available on the market!”

Silenced at source

The acoustically insulated flexible ventilation ducts are part of Panflex’s heat recovery ventilation package, which also includes two thermally insulated ventilation ducts, eight stainless steel hose clamps and a roll of Alutape. “Our heat recovery ventilation package is available for all standard diameters (125 to 200 mm), consists exclusively of A-brand products and is kept in stock as standard by the leading technical wholesalers,” says Kale. “The acoustic ventilation ducts are already taped at one end, so they can be connected directly to the heat recovery unit. This silences as much noise as possible at source. By using itch-free Ecose insulation wool, we also ensure easier installation and the best possible noise attenuation. In the most common diameters, with a duct length of 1 metre, we can reduce noise by 30 to 33 dB(A)! That makes us unique in the Netherlands.” For those looking to reduce cross-talk as well as insertion noise, Panflex also offers an extensive range of cross-talk silencers.   

Een zakelijke vraag aan Panflex? Get in touch

Companies in this story

Keep following this

Get an email when a new story is published. No account needed.

What you follow
  • SubjectInnovation & technology
  • CompanyPanflex
Share this article

Advertisement

Follow on Stedenbouw

Follow

Follow a project or company and you’ll receive an email whenever a new story appears. Follow a theme or topic and you’ll receive a weekly roundup. No account or password needed: every email includes a link to what you follow.