Residential and non-residential construction

High Tech Campus 91 in Eindhoven

Text Lieke BousemaImage Bouwbedrijf van de Ven

De toren is grotendeels uitgevoerd met vliesgevels. Voor de verdiepingen daaronder is gekozen voor houtskeletbouwelementen.
De toren is grotendeels uitgevoerd met vliesgevels. Voor de verdiepingen daaronder is gekozen voor houtskeletbouwelementen.

Successful delivery with the right expertise in-house

A new multi-tenant office building was completed on the High Tech Campus in Eindhoven in early October. Lucis One is sustainable and smart, and was developed to meet the BREEAM and WELL Gold certification criteria. The ten-storey building at High Tech Campus 91 is highly visible and accessible from the motorway, and was built by Bouwbedrijf van de Ven. “From the structural frame through to the timber frame walls, we used our own equipment and our own people,” says Project Manager Niek Schuijers.

The floors were made wind- and watertight in no time, allowing the fit-out to start as soon as possible.

To support the strong growth of the high-tech industry in the Eindhoven region, the High Tech Campus in Eindhoven (HTCE) aims to develop at least 100,000 m2 of high-quality R&D buildings on the southern side of the site over the coming years. In doing so, the campus is setting itself a new ambition: from high tech to high end. Lucis One is the first in a series of new developments. The ten-storey office building has a gross floor area of approximately 12,600 m2. Each floor can accommodate one or more tenants.

Hybrid structural frame

Bouwbedrijf van de Ven’s contract covered both the building and building services work, says Schuijers. “For this new build, we constructed foundations on bored piles. The concrete frame was built on top. The initial idea was to build the entire structure using precast concrete, but on our advice a hybrid system was chosen. This proved much more attractive, both financially and in terms of the programme. The hybrid approach allowed us to continue engineering right up to the concrete pour. Openings for services, for example, also only had to be finalised shortly before the concrete was poured.”

The walls, columns and beams were all cast in situ by Bouwbedrijf van de Ven’s own specialists. “The walls on the upper floors were cast in situ, while the beams and columns were made at ground level on a casting bed set up on site,” says Schuijers. “They were then transported to the right floors and installed by our own people using our own equipment.”

The foundations for this new build were constructed on bored piles, with the concrete frame built on top.

Quickly made wind- and watertight

The tower is largely clad in curtain walling. Timber frame elements were chosen for the floors below. They were manufactured at Bouwbedrijf van de Ven’s own joinery factory and fitted with aluminium window frames. “All the elements were then transported to the site just in time, in complete packages, and installed directly on the floors,” says Schuijers. “This meant the floors were made wind- and watertight in no time, so the fit-out could start as soon as possible. We were already fitting out the lower floors while concrete was still being poured above.”

Most floors have been given a neat basic finish, with a large open-plan office area, ceilings and floor coverings. “Four complete floors (1, 5, 6 and 7) have already been let,” says Schuijers. “For these, we also provided the tenant fit-out on behalf of the High Tech Campus and in consultation with the tenants.”

Comfortable and green

Building services such as heating, cooling and lighting can be controlled in response to demand, and the two low-rise roofs have been laid out as intensive roof gardens. “Several green façades have also been created, helping to provide a pleasant working environment.”

Question about this story? Ask your question

Who worked on Lucis One

  1. DeveloperHigh Tech Campus in Eindhoven (HTCE)In this story
  2. ArchitectINBO ArchitectenIn this story
  3. ContractorBouwbedrijf van de VenIn this story
  4. architectINBOMentioned in Architectural façade profiles
  5. facade profilesArcelorMittal ConstructionMentioned in Architectural façade profiles
  6. installation partnerDamu Systeembouw B.V.Mentioned in Architectural façade profiles
  7. manufacturer3A CompositesMentioned in 4,750 m2 of aluminium composite façade elements for Lucis One
  8. aluminium composite facade elementsKempen ComposietMentioned in 4,750 m2 of aluminium composite façade elements for Lucis One
  9. clientHigh Tech Campus Eindhoven (HTCE)Mentioned in 4,750 m2 of aluminium composite façade elements for Lucis One
  10. cables and cable mesh systemsKabel DesignMentioned in Innovative green façades for High Tech Campus 91
  11. aluminium composite facade elementsCladdingMentioned in New landmark on the High Tech Campus
  12. Project managementvb&t ProjectmanagementMentioned in A green oasis at the High Tech Campus
  13. designJuurlink en GelukMentioned in A green oasis at the High Tech Campus

Keep following this

Get an email when a new story is published. No account needed.

What you follow
  • ProjectLucis One
  • SubjectResidential and non-residential construction
  • CompanyHigh Tech Campus in Eindhoven (HTCE)
  • CompanyINBO Architecten
  • CompanyBouwbedrijf van de Ven
Share this article

Advertisement

Follow on Stedenbouw

Follow

Follow a project or company and you’ll receive an email whenever a new story appears. Follow a theme or topic and you’ll receive a weekly roundup. No account or password needed: every email includes a link to what you follow.