Residential and non-residential construction
New electrical and mechanical systems for sustainable living comfort
Text Patricia van der BeekPhotography Van der Sluis Renovatie

The four apartment blocks owned by housing association Mercatus on Urkerweg in Emmeloord are set for a major sustainability upgrade. Van der Sluis Renovatie is contributing to the project’s building services installation work on behalf of Talen Vastgoedonderhoud.
“We are responsible for both the electrical and mechanical installations,” says Hendri Crediet of Van der Sluis Renovatie. “The 140 flats in the blocks are being taken off gas and switched from high-temperature to low-temperature heating. Almost everything is being renewed, not just the heating system, but also the water supply, electrical wiring and rainwater drainage.”
Heating and hot water
In each block, the gas boilers are being replaced with a heat pump installed in the plant room. The heat pump is connected to a buffer tank that stores 1,500 litres of hot water. Communal solar thermal collectors help produce hot water. “Distribution pipes run from the plant room through the service risers to the flats,” says Crediet. “We connect these to the flats’ central heating pipes. We are replacing the water supply with a ring main to ensure residents have hot water on tap at all times. Each flat will also have individual water and energy metering.”
Ventilation and electrical systems
To make the flats even more sustainable and comfortable, Van der Sluis Renovatie is installing balanced ventilation with heat recovery (MVHR). Crediet explains: “The heat exchanger in this system uses heat from the outgoing air to warm the cooler incoming air. This reduces the energy needed to heat the incoming air. We also installed the ventilation ducts required to ventilate every room.” The electrical work involves renewing the wiring, cables and distribution boards in the flats. New circuits have been added for the washing machine and electric hob. Each block is also being fitted with a video intercom system and solar panels.

Working to the schedule
During the works, Van der Sluis Renovatie follows the schedule for the interior work. Crediet explains: “The first thing we do is remove the radiators. Next comes the first-fix installation of the MVHR unit, central heating pipes and electrical wiring. We also remove the water heater and connect the water supply to the ring main. Once the façade insulation is in place, we reinstall the radiators and commission the MVHR and central heating systems. We install the rainwater drainage once the exterior façade is completely finished.”
Making the most of it
He emphasises how much is changing for residents: “In the refurbished all-electric flats, everyday activities such as cooking and heating will work a little differently. Mercatus is helping residents adapt. We are supporting them too, including with instructions on how to use the installations. Together, we are making sure residents can make the most of their sustainable, comfortable homes.”
Question about this story? Ask your question
Wie aan Flats Urkerweg Emmeloord werkte
- Electrical and mechanical installationsVan der Sluis RenovatieIn this story
- Architectural sliding panels
DUCOMentioned in Façade renovation with sliding shutters at blocks of flats in Emmeloord - housing associationMercatusMentioned in Façade renovation with sliding shutters at blocks of flats in Emmeloord
- supply chain partnerTalen VastgoedonderhoudMentioned in Façade renovation with sliding shutters at blocks of flats in Emmeloord
Keep following this
Get an email when a new story is published. No account needed.
- ProjectFlats Urkerweg Emmeloord
- SubjectResidential and non-residential construction
- CompanyVan der Sluis Renovatie


















