Residential and non-residential construction
The Muse | ‘Working together on high-quality, super-sleek façades’

A fine example of collaboration with the façade partners. That is how Construction Care, a manufacturer and supplier of plastic setting frames and cast-in frames, looks back on its work on The Muse in Rotterdam.
Construction Care developed, manufactured and supplied the setting frames for the east and west façades of The Muse. Some of the setting frames in the lower section of these anthracite-coloured façades were installed on site. Most were incorporated into the precast concrete façade elements used to construct the tower. Metaglas’s electric sliding windows and Blitta’s tilt-and-turn windows were fitted into the setting frames.
Integrated façade solution
The façade elements were supplied by Decomo, a specialist in precast architectural concrete elements. Decomo began working closely with Construction Care at a very early stage. “Working together and in close consultation with Adviesburo Snijders, Blitta and Metaglas, we developed a cost-efficient façade element that met the quality requirements and architectural vision,” says Freek Drop, Managing Director of Construction Care. “We integrated our setting frames into the elements, with very tight dimensional tolerances. The windows from Metaglas and Blitta fitted seamlessly into them.”
Structurally sound, durable and fire-safe
The setting frames in the precast elements are made from fully foamed plastic. They can be worked just like wood and provide excellent insulation. Drop says: “The setting frames are an important part of the transition between inside and outside. They contribute to the structural integrity of the building and to the façade’s resistance to wind and water. They also meet Fire Safety Class B. This is very important, as fire safety regulations for high-rise buildings are becoming increasingly stringent.” The plastic setting frames and cast-in frames were manufactured using lean production methods, maximising value for the client while minimising waste.
A super-sleek appearance
To achieve the desired architectural vision, the windows from Metaglas and Blitta were installed in the setting frames from the inside. “This is an unusual application,” says Drop. “The architect did not want to see any window frame profiles on the façade. By installing the frames from the inside and making the window opening in the outer leaf slightly smaller than the one in the inner leaf, from the outside you see only architectural concrete and glass. This creates a super-sleek appearance.”
Delivering on time
Construction Care manufactured and supplied all the frames. One batch was sent to the construction site just in time, while the other went to Decomo. Drop says: “It was crucial that we delivered on time to keep Decomo’s production process running. Thanks to excellent collaboration, everything went smoothly.”
Construction Care is now working, again in close collaboration with the façade partners, on preparations for the neighbouring high-rise project CasaNova.
Question about this story? Ask your question
Who worked on The Muse
- subframesConstruction CareIn this story
- facade elementsDecomoIn this story
- electric sliding windowsMetaglasIn this story
- 3D modelAdviesburo SnijdersMentioned in The Muse | Colourfast precast architectural concrete façade elements
Keep following this
Get an email when a new story is published. No account needed.
- ProjectThe Muse
- SubjectResidential and non-residential construction
- CompanyConstruction Care
- CompanyDecomo
- CompanyMetaglas


















