Residential and non-residential construction

The Muse | Façade engineering feats

The Muse | Façade engineering feats

The dynamic façade of The Muse of Rotterdam is largely defined by its transparent design and robust white balconies. Blitta contributes to this with full-storey aluminium sliding doors up to eight metres long.

Blitta also installed the roof windows for the sloping section of the building, the aluminium entrance and car park façades, and around two hundred tilt windows in the prefabricated elements of the east and west façades.

New system
“The aluminium sliding doors were custom-made for this high-rise project,” says Blitta senior account manager Tom van der Heijden. “Working closely with our partner Reynaers Aluminium, we developed a new system that meets stringent requirements, including those for wind loads. In this new system, we combine a frame profile offering high levels of wind and water resistance with a sliding sash.”

Prefabricated and semi-prefabricated
Blitta prefabricated almost all the sliding doors in full, so they could be lifted into place and installed directly on site. “We are currently installing the large doors for the penthouses,” says Blitta project manager Achraf Dahia. “We deliver these to the site without glazing, as semi-prefabricated units. Transporting a glazed door measuring 8 x 3.30 metres is very costly. We avoid that expense by installing the glazing on site.” 

Lifting into place with suction cups
Blitta developed an innovative suction-cup system for lifting the sliding doors into place. The cups grip the element by its glass, eliminating the need for unsightly lifting eyes. Dahia: “Depending on the size of the door, we use four to six suction cups. These are connected to the crane by a lifting beam. The beam can accommodate all sizes of sliding door.” Lifting each unit into place takes no more than fifteen minutes. Blitta then completes the doors from the inside. This includes making them wind- and watertight with foil and concealing the rainwater drainage pipes.

With only a few doors left to install, Van der Heijden is already looking back on the work with satisfaction: “Thanks to thorough preparation, work on site is progressing smoothly. The same goes for our collaboration and coordination with the contractor and fellow façade contractors. Building together is about trust. On that basis, we are now involved as a partner of Smit’s Bouwbedrijf in the neighbouring CasaNova project. This, too, promises to be a façade engineering feat.”

Question about this story? Ask your question

Wie aan The Muse werkte

  1. aluminium sliding doorsBlittaIn this story
  2. subframesConstruction CareMentioned in The Muse | ‘Working together on high-quality, super-sleek façades’
  3. facade elementsDecomoMentioned in The Muse | ‘Working together on high-quality, super-sleek façades’
  4. electric sliding windowsMetaglasMentioned in The Muse | ‘Working together on high-quality, super-sleek façades’
  5. developerWilma WonenMentioned in The Muse | Rotterdam
  6. structural shellSmit's BouwbedrijfMentioned in The Muse | Rotterdam
  7. 3D modelAdviesburo SnijdersMentioned in The Muse | Colourfast precast architectural concrete façade elements

Keep following this

Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.

What you follow
  • ProjectThe Muse
  • SubjectResidential and non-residential construction
  • CompanyBlitta
Share this article

Advertisement

Follow on Stedenbouw

Follow

Follow a project or company and you’ll receive an email whenever a new story appears. Follow a theme or topic and you’ll receive a weekly roundup. No account or password needed: every email includes a link to what you follow.